DeWalt DW745 10-Inch Table Saw Review

DeWalt DW745 10 Inch Table Saw Review

The DeWalt brand is well-known among DIY enthusiasts as among the best because their products are characterized by a durable construction, practical features, and versatile uses. The DeWalt DW745 table saw is one such product, although we must also say that it has a few minor disadvantages.

Features

The DeWalt DW745 table saw has several practical features that we like in such a product.

Cast table top design

The table itself is strong and stable enough for use with thick pieces of wood. This means there’s minimum vibration during the sawing process itself, as well as minimum noise although it may still be necessary to wear ear protection to deaden the sound.  There are no extensions to the table so it may also be necessary to add another work table when working with larger materials.

But there’s onboard storage on the table where the Site-Pro Guarding parts and push stick can be stored when not in use. These can, nonetheless, be easily accessed when you need them for your tasks. There’s even a 2.5-inch dust collection port so that the dirt around your work area can be minimized; be sure to connect it to your portable vacuum to reduce cleaning time.

15-amp motor

The 15-amp motor is a high-torque motor with speeds of up to 3,850 revolutions per minute (rpm). While it’s neither as large nor as powerful as those on full-size table saws, it has sufficient power in completing smaller jobs for DIY enthusiasts and woodworking professionals.

It can be used in cutting pressure-treated lumber and hardwood using the 10-inch blade. With its 3,850 rpm no-load speed, you should be able to make clean cuts quite easily and quickly.  Many users even say that they use it for cutting wood as thick as 3 inches, even higher, without putting too much pressure on the motor.

But even when there seems to be a little too much pressure on the motor, it has an overload protection system that minimizes the risk. You can still use the table saw for cutting frozen, hard, or wet wood occasionally; be sure to let the motor rest for a few seconds before reusing it just to be on the safe side.

The table saw also has an effective fence system with a 610mm rip capacity for cutting larger sheet materials according to your desired size. The bevel lock can be quickly adjusted, too, especially with its large scale, but a few users complained about minor variations affecting the precision of cuts.

Among the more notable features of the DeWalt DW745 is the fact that adjustments can be made without using additional tools (i.e., tool-free adjustment system).  The telescopic rails also allow for positioning the saw according to your personal use. Both of these features means it’s relatively easy to fine-tune the table saw.

But there’s no dust collection port. It’s less of an issue, however, because the unit itself has a fully enclosed design.

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 20-Inch Max Rip Capacity, Corded 120V AC

Weighs 45 pounds

The table saw doesn’t seem portable with its 45-pound weight but there are a few features that make it more portable. First, the telescoping rail fence can be retracted so that it has a smaller footprint and, thus, more easily carried.  Second, it has a locking mechanism that makes it easy to fit it on top of a stand.

Besides, the heavier weight also means that it’s likely to be more durable than its lighter counterparts, especially in terms of being able to accommodate heavier pieces.

Sharp blade capacity

The table saw has a large 20-inch rip capacity, as well as a rack and pinion fence rails system for fast, safe and accurate adjustments. The telescoping rails can also be moved out of the way so that the blade can rip full sheets more easily, aside from their transport use.

The maximum cut depth is 3-1/8 inches at a 90-degree angle and 2¼ inches at a 45-degree angle. It isn’t as deep as other 10-inch table saws but it can get the job done for most applications.

But the table’s surface has been treated so that there’s reduced friction with the material resulting in better quality cuts.  There’s even a metal roll cage base, a definite improvement over plastic bases.

The package contains the 10-inch jobsite table saw with 24-tooth carbide blades, as well as a blade guard, a miter gauge, and a push stick. It also comes with a 3-year limited warranty, a 1-year free-service contract, and a 90-day money-back guarantee.

Pros

  • Powerful 15-amp motor suitable for most jobs
  • Ultra-sharp 24-tooth carbide blades with exceptional cutting and ripping capacity
  • Durable table with on-board storage and a metal roll cage base
  • Comes with exceptional warranties

Cons

Insufficient dust collection feature

Who it is best for

This is a table saw with multiple uses so it’s a worthwhile investment for DIY enthusiasts and experienced woodworkers. Among its uses are ripping floor boards, filler boards, and moldings, as well as wainscoting, which are tasks performed by cabinet installers, trim carpenters, and remodelers. Serious woodworkers also find the DeWalt DW745 useful for framing lumber, ripping and cutting wood for rabbets, dadoes, and tenons.

Verdict

The DeWalt DW745 table saw is a great product for people who want reasonably priced workshop equipment with many practical features. We highly recommend it if you’re looking for a table saw for beginners, yet can still be used by veterans in construction sites.

CHECK LATEST PRICE ON AMAZON.COM

About the author

Woodworker

Click here to add a comment

Leave a comment: